How to Install the Mobile TV Stand Correctly

Everyone may not know that the LCD TV can be installed with a mobile stand with the professional TV cart installation instructions. In this era of new technology, the mobile TV stand is a very household device with high performance. If you want to install a quality electric mobile tv stand, you can follow these mobile tv installation guidelines:

1. First fix the mobile TV stand and install the hanger

To accurately locate the mobile TV stand installation position of the flat-panel TV on the mounting surface, first fix the mounting surface hanger part to ensure that the flat-panel TV is stable, the center of gravity is stable, and the level difference between left and right is less than 1 degree. Metal components must be firmly welded or edge joints must be treated with rust prevention.

2. Avoid scratching the display during the LCD TV Mobile Stent Installation

Flat-panel TVs are relatively "delicate", and we can easily cause physical damage to the surface if we are not careful, such as damage to the small lines and devices on the screen, resulting in dead pixels. Therefore, be careful during the TV cart installation process. When moving the whole machine, handle it gently, and prepare bedding to prevent scratches on the display screen.

3. Use a levelling instrument to fine-tune the mobile TV stand

After the display screen is hung, measure it with a level ruler, and adjust the bracket screw to make the display screen completely horizontal. The position translation error of the flat-panel TV cart installation should be less than 1cm, and the left and right tilt error should be less than 1 degree.

4. Connection of other components

If the display screen is connected to the speaker and the mobile TV wall mount, pay attention to distinguish the left and right sides and the front and back. When connecting the speaker cable, pay attention to the positive and negative polarity of the speaker cable to prevent the sound of the left and right channels from being reversed. The power line should be equipped with protective devices such as an air switch, and the length of the power line and signal line should not be changed at will. To lengthen or change, use cables that meet the requirements.

The above is about the four steps and methods for installing the mobile TV screen stand. Have you already learned it? When installing, you must follow the mobile TV installation instructions strictly, or it will affect the normal use of the mobile stand.

Iworkhub, a professional tv bracket supplier, is committed to providing display installation solutions to support dynamic information sharing anywhere. Our complete installation solution series includes a variety of manual or electric floor stand, video wall mount, and custom floor TV stand installation for commercial panels, interactive displays, LCD, LED TV walls, projectors, etc. If necessary, you can call us directly.